Products

This section contains 40 1″ holes per foot, and is used in standard conditions with 4″, 5″, and 6″ tile (sometimes 8″ where the flow capability of an 8″ inlet is not needed).

This is a 6″ x 5/16″ holed orange section used underground from the tee as a riser extension. It can be cut at different locations (as marked on the section) to adjust the height of the inlet.

This part is a 6″ x 6″ New Style Tee to be used to connect directly to 6″ corrugated or dual wall tile and has a 6″ inlet bell so that a 6″ inlet can be snapped directly into the tee without the use of an adapter.

This is a 6″ resrictor to adjust the flow of water to the main line.

This increaser adapts a 6″ tee to a 8″ riser section.

This is a reducer that connects 5″ or 4″ corrugated tile to a New Style Tee.